The Bulldog 19mm Magnetic Scaffold Socket

The Bulldog 19mm Magnetic Scaffold Socket is a specialist scaffold accessory designed for use with a 21 mm impact scaffold socket and compatible impact wrenches.

The magnetic retention system helps keep the Bulldog securely positioned inside the 21 mm socket during normal handling and operation.

Dimensions:
Overall Length: 64 mm
Socket Depth: 19 mm
Socket Outer Diameter: 21 mm
Hex Length: 25 mm

Weight:
152 g

Designed for use on:

· 19 mm scaffold bolts and nuts

· Niko Track fixings

· Excalibur 19 mm fixings

· Other compatible 19 mm applications

Compatible with:

· 21 mm scaffold impact sockets

· Makita impact wrenches

· Other suitable impact wrenches

· Professional scaffold tools using a 21 mm impact socket system

Package Contents:

· 1 × Bulldog 19mm Magnetic Scaffold Socket

· 1 x Nylon Holder

Installation:

1. Inspect the Bulldog 19mm before use.

2. Ensure the 21 mm socket is clean and free from debris.

3. Insert the Bulldog 19mm into the 21 mm socket.

4. Confirm the magnetic retention system is holding the Bulldog securely in position.

5. Attach the socket assembly to the impact wrench.

6. Test fit on the fastener before operation

Operating Instructions:

1. Position the Bulldog 19mm onto the 19 mm nut or bolt.

2. Operate the impact wrench according to the manufacturer’s instructions.

3. Remove the tool from the fastener after tightening or loosening.

4. Inspect the Bulldog periodically during use.

WARNING:

· Always wear suitable PPE.

· Wear safety glasses, gloves, hard hat and site-required equipment.

· Inspect the Bulldog before each use.

· Do not use if cracked, damaged or excessively worn.

· Do not modify the product.

· Use only with compatible impact sockets and impact tools.

· Keep fingers clear of rotating components.

· Ensure the Bulldog is fully seated before operating the impact wrench.

· Stop use immediately if damage is detected.

· Socket 19 mm Bullet only suitable for Makita 21mm socket

· Do not use 19 mm Bullet more than 10 times socket to do the Excalibur screw bolts, because you can burn your cordless wrench impact.

· 19 mm Bullet can be used only on 21mm ISS-UK and 08M21-52 socket,

· The socket has a strong magnet, keep it away from electronic devices such as smartphones, laptops, etc.

· Do not keep socket holder or just socket on side or inside trousers or bag with smartphone

· Do not keep smartphone and 19 mm Bullet in same trousers pocket or bag , because electronic parts can be damaged.

The Bulldog 19mm Magnetic Scaffold Socket

The Bulldog 19mm Magnetic Scaffold Socket is a specialist scaffold accessory designed for use with a 21 mm impact scaffold socket and compatible impact wrenches.

The magnetic retention system helps keep the Bulldog securely positioned inside the 21 mm socket during normal handling and operation.

Designed for use on:

· 19 mm scaffold bolts and nuts

· Niko Track fixings

· Excalibur 19 mm fixings

· Other compatible 19 mm applications

Compatible with:

· 21 mm scaffold impact sockets

· Makita impact wrenches

· Other suitable impact wrenches

· Professional scaffold tools using a 21 mm impact socket system

Package Contents:

· 1 × Bulldog 19mm Magnetic Scaffold Socket

· 1 x Nylon Holder

Installation:

1. Inspect the Bulldog 19mm before use.

2. Ensure the 21 mm socket is clean and free from debris.

3. Insert the Bulldog 19mm into the 21 mm socket.

4. Confirm the magnetic retention system is holding the Bulldog securely in position.

5. Attach the socket assembly to the impact wrench.

6. Test fit on the fastener before operation

Operating Instructions:

1. Position the Bulldog 19mm onto the 19 mm nut or bolt.

2. Operate the impact wrench according to the manufacturer’s instructions.

3. Remove the tool from the fastener after tightening or loosening.

4. Inspect the Bulldog periodically during use.

WARNING:

· Always wear suitable PPE.

· Wear safety glasses, gloves, hard hat and site-required equipment.

· Inspect the Bulldog before each use.

· Do not use if cracked, damaged or excessively worn.

· Do not modify the product.

· Use only with compatible impact sockets and impact tools.

· Keep fingers clear of rotating components.

· Ensure the Bulldog is fully seated before operating the impact wrench.

· Stop use immediately if damage is detected.

· Socket 19 mm Bullet only suitable for Makita 21mm socket

· Do not use 19 mm Bullet more than 10 times socket to do the Excalibur screw bolts, because you can burn your cordless wrench impact.

· 19 mm Bullet can be used only on 21mm ISS-UK and 08M21-52 socket,

· The socket has a strong magnet, keep it away from electronic devices such as smartphones, laptops, etc.

· Do not keep socket holder or just socket on side or inside trousers or bag with smartphone

· Do not keep smartphone and 19 mm Bullet in same trousers pocket or bag , because electronic parts can be damaged.

Inspection and Maintenance

Before each use check:

· Socket body condition

· End cup security

· Magnet retention

· Signs of cracking

· Excessive wear

· Deformation

Clean using:

· Dry cloth

· Light brush

· Non-corrosive cleaning products

Do not:

· Weld

· Grind

· Heat treat

· Modify the product

Storage

Store in a clean and dry environment.

Avoid:

· Excessive moisture

· Corrosive chemicals

Active filters:

BULLDOG 19mm Magnetic Scaffold Socket

Stay connected